AVAQUA is an excellent cleaner and dewatering fluid which is perfect for:
- Degreasing rims and disc rotors so brake pads grip and braking performance improves.
- Removing moisture from the drivetrain and brake calipers.
- Cleaning glasses and sunglasses
- Degreasing and cleaning frame prior to applying stickers
- Cleanup after a spill of lube or brake fluid.
- Giving forks or shocks a final spray wipe and clean after service.
- Applying to bars so grips slide easily into place and then remain in place after evaporation of the AVAQUA.
AVAQUA does not cause damage to tyres, paintwork, carbon or alloy parts. After cleaning it evaporates rapidly and leaves no residue.
DIRECTIONS FOR USE:
- Remove mud and dirt from area that needs degreasing and cleaning.
- Allow excess water to drain.
- Direct fine spray of AVAQUA directly onto the area (e.g. frame, braking surface, chain, glasses etc).
- Thoroughly dry and clean with dry, lint-free cloth.
- Allow to air-dry.
Check there is still a good thickness of pad compound, more than 2mm is a good guide. If it does then a nice easy bit of maintenance to revitalise a grubby pad (top right) is to clean thoroughly with AVAQUA and then sand back braking surface with some fine P800 microgrit paper. Make sure to bed the pads in again after this. If pad is too worn or looks to have other damage then replace.